How To Use Odie's Oil

Y'all have planned your approach. Y'all have sanded and prepped your wood. Now y'all are gear up to finish it:

Tips and Instructions for using Odie's Oil

The Basics

1 - Apply the Odie'south Oil finish with a brush, abrasive pad, (steel wool or other), your hands, or a rag. Almost whatsoever applicator will work! When applying the oil, e'er rub the finish into the surface. This volition push button the special conception of oils and waxes into the forest surface, thereby activating the wood fiber to draw in more finish, thus activating the oil and wax, and in so doing, creating a bond between the wood and the oil. Really rub vigorously! The more endeavor, the better the consequence! Utilise more than oil as needed. More oil is needed when the wood absorbs all the oil from the surface. You have practical enough when a lite film of oil remains on the surface.

2 - Give the oil a good 30 minutes to sink into the wood. If the surface has absorbed the oil and feels dry to impact, apply more than. Echo the procedure until the wood is fully saturated. If the work piece no longer absorbs oil and oil remains at the surface of all parts of the work slice, then the piece is fully saturated with oil.

three - Now that the piece is fully saturated, set it aside and allow the cease to "prepare upwardly" for at least 40 minutes. Yous can wait longer, up to 24 hours. Just call up, the longer yous wait the more hard it volition be to buff (results will vary).

four - After the 40-minute set up time, accept a dry and clean lint-complimentary fabric and completely vitrify the unabridged surface until all the oil is removed from the surface. Buff vigorously! The slice should feel dry to touch when finished.

5 - Put the piece aside and permit it dry 72 hours before use.

Calculation Coats For Additional Sheen and Protection

Subsequently the commencement 24 hours of dry time you tin can apply a second coat of Odie'south Oil for additional sheen and protection. Just repeat the process described to a higher place. Yous can utilise as many coats as you desire.

Tips and Techniques For Using Odie'south Wood Butter and Odie'southward Wax

Both Odie's Forest Butter and Odie's Wax can exist used as finishes by themselves. They both requite their own unique glow and luster.

Using Odie's Wood Butter To Reduce Checking

Odie'due south Wood Butter tin can be used on wet forest with Odie's Oil or Odie'due south Oxi Oil every bit a wood stabilizer. When using Odie's Forest Butter in conjunction with Odie'south Oil, turners can actually turn a wet piece to its concluding shape and use the Odie's Wood Butter to reduce checking and motion in the piece. For all-time results, try the following technique:

1- Turn the piece and apply Odie'southward Oil to full saturation without buffing off.

2- Then utilize a coat of Odie'due south Wood Butter every bit a topcoat.

3- Set the slice aside out of the sun in a stable environment, until it reaches its EMC (equilibrium moisture content).

4- Finally, reapply a glaze of Odie's Oil, Odie's Oxi Oil or Odie's Super Penetrating Oil to reactivate the end and buff the residue stop off to the desired sheen.

Odie's Wax equally a Height Coat

All Odie's Wood Finishes can be top coated with a glaze of Odie's Wax for extra sheen and extra protection!

Fun Tricks and Techniques

For Added Sheen and Protection

Add a coat of Odie'due south Wood Butter or Odie'due south Wax afterwards the initial awarding of Odie's Oil or Odie'south Oxi Oil to increase sheen and protection. Odie's Wood Butter and Odie'southward Wax are practical basically the same fashion. Merely follow the previous instructions. Add as many coats equally desired.

A Layering Flim-flam For an Even Higher Luster

Wait at to the lowest degree 24 hours for your application of Odie's Wood Butter to dry and add together another light coat of Odie's Oil or Odie's Oxi Oil, but buff out this coat immediately (no set up time). This will requite the slice a brilliant, high luster wet look! The purpose of this last, light coat of Oil is to level out the previous glaze of Odie'due south Wood Butter. You can apply the same process with the wax.

Get a Moisture, Glossy Look with Odie's Super Penetrating Oil and Odie's Woods Butter

To accomplish a wet and sleeky look, use Odie's Super Penetrating Oil over Odie's Wood Butter. It levels out the previous coat of wax to reach that ultimate shine.

A Time Saving Trick

For some other way to finish with Odie's Oil and get a college sheen than simply a coat of Odie'south Oil, only without the expect of the previous tricks, endeavour the post-obit technique:

1- Employ one heavy coat of Odie's Oil, Odie'southward Oxi Oil or Odie's Super Penetrating Oil and and then immediately utilise Odie's Wood Butter in the same application.

ii- Work this slurry of Odie's Oil and Wood Butter into the wood surface. Try to become every bit much as possible to absorb into the forest. Once again, if the surface starts to feel dry, add together more of each product until the wood fiber is completely saturated.

3- Expect the xl-minute prepare fourth dimension or longer and VIGOROUSLY buff the surface COMPLETELY clean and dry to touch.

4- Let the piece dry out for 72 hours earlier use. This process will give a higher luster than the Odie'southward Oil alone application, just commonly not every bit much equally the layered Oil/Butter or Wax so Oil arroyo described in the previous tricks.

A Annotation Almost Friction Shine and Buffers

All Odie's finishes can exist used like a friction polish, and all Odie's finishes can be used with mechanical buffers. In fact, the friction and heat caused from the lathe or mechanical buffer will speed upwardly and heighten the application process. In about cases, the piece of work piece can be buffed out to its last polish immediately after applying because the heat caused by friction shortens the fix time.

Final Thoughts

A Reminder About Oil Soaked Rags

Alert: Oil and Solvent soaked rags are combustible. Delight dispose of rags in a sealed container.

Odie'south Oil Wants Y'all To Flourish

All of the Odie'south products are made to work together or alone. With this flexibility, yous are allowed to customize your finish, and you are given the freedom to create a project that is uniquely yours.

We can simply requite tips on how to reach different results, simply in your easily, y'all can take it to whatsoever level desired. It's the easiest cease to use and get great results. Odie's Oil is a cease that brings out the true artist in everyone!

← Previous Post Side by side Postal service →